Introduction
Rollers are made of chilled cast iron with vanadium and titanium alloys (Rollers of G mode are made of high grade steel with hard alloy welded on the surface). Roller faces are hard and anti-wear. Both of font and back rollers are fluted. The internal cavity of rollers is processed to make temperature well proportioned on the roller surfaces.
The machines are equipped with an overload protection device to prevent the major components from being damaged due to overloading.
The machines are also equipped with an emergency device. When an emergent accident happens, just draw the safety pull rod, machines will stop immediately. It is safe and reliable.
The turning of the cylinder sieve will repeatedly sent back unqualified bigger rubber chips for further cracking.
Usage
Be applicable for cracking scrap rubber.
Specification
|
Model and Specifications |
ZKC-560B |
ZKC-560G |
CP-560G |
|
Working Diameter of Front Roller (mm) |
510 |
510 |
510 |
|
Working Diameter of Back Roller (mm) |
560 |
560 |
560 |
|
Working Length of Rollers (mm) |
800 |
800 |
800 |
|
Linear Speed of Front Roller (m/min) |
24.3 |
23.7 |
28.3 |
|
Speed Ratio |
1:1.55 |
1:1.55 |
1:1.55 |
|
Max. Nip (mm) |
15 |
15 |
15 |
|
Material Going Through Nip (kg/h) |
2,000 |
2,000 |
2,000 |
|
Main Motor Power(kw) |
90/110 |
90 |
90 |
|
Speed Reducers |
NGW Planetary Carbide-Faced Speed Reducers | ||
|
Overall Dimension (mm) |
5,400×2,330×2,100 |
5,430×2,127×2,100 |
5,250×1,490×1,725 |
|
Remarks |
Mainly used for bias tires |
Mainly used for radial tires |
Mainly used for radial tires |
CP Type Cracker
